Hello tout le mondeQuand j'ai rooté ma shield j'étais avec l'update 82. Depuis j'avais pas oser faire d'autre maj de peur de ne plus arriver a la rooter.
Mais aujourd hui j'ai tenté et installer l'update 99 puis 101. N'arrivant pas a rooté la shield avec la méthode que j'avais utilisé a l'époque , j'ai cherché sur le net et je suis tombé sur ce tuto simple et efficace puisque ma console est rooter de nouveau.
Mon niveau d'anglais étant relativement moyen pour ne pas dire mauvais (comme mon orthographe d'ailleur
), je n'ai pas traduit ce tuto. Mais malgré mon niveau j'y suis arriver sans difficulté donc je pense que tout le monde pourra y arriver aussi.
Root On-Device (Jellybean) If you just bought a Shield new from Gamestop or another vendor, you probably have Android Jellybean installed on it. You will use this section.
1. On your Shield, download TowelRoot v3 (apk | zip | original site). If you have trouble getting the apk with your browser, download the zip and extract it using your favorite Android file manager (I recommend X-plore | review).
2. Install TowelRoot on your Shield. Note: You must disable VERIFY APPS and enable UNKNOWN SOURCES in order to install this.
3. Run TowelRoot. If all goes well, you’ll see a MAKE IT RAIN button. Tap it.
4. TowelRoot should report back that your device is rooted.
5. You’re done!
Root On-Device (Kit Kat)
If you’ve done pretty much any update to your Shield, you’re running Kit Kat and will need to use this section.
Note: This still works with Update 5 that was released August 2014.
1. On your Shield, download TowelRoot v1 (apk | zip). If you have trouble getting the apk, download the zip and extract it using your favorite Android file manager (I recommend X-Plore | review). For some reason, v3 doesn’t seem to work on Kit Kat (it will tell you that the device isn’t supported).
2. Install TowelRoot on your Shield. Note: You must disable VERIFY APPS and enable UNKNOWN SOURCES in order to install this.
3. Run TowelRoot and click the MAKE IT RAIN button. Do not panic if the Shield doesn’t behave as the onscreen instructions say it should.
4. Wait about 15 seconds. If the Shield doesn’t reboot, manually reboot the Shield.
5. Once you’re back up, install SuperSU from the Google Play Store. Follow the instructions. Update the Binary if required. (Select NORMAL as the method)
6. That’s it. You’re done. Your first step should be the
[Vous devez être inscrit et connecté pour voir ce lien].
SOURCE
Sam 25 Avr 2015, 01:02